Official Displays of

ELITE SHOWCASES

With these showcases you create your own museum of your favorite driver or drivers, and with their tastefully superior design they will be readily accepted in any room of your home or office.

All showcases have crystal clear Plexiglas shelves and an upward sliding front to protect your collection from dust, dirt, and unwanted handling. They are stained with a color that accents the real "Birch" or simulated "Coffee Bean Leather" back and is neutral to the colors of your cars. There are no mirrors or checkered bases or backs in these showcases, as they tend to take the focus away from your collection and can create a cluttered look within a multi-car case, so the focus is kept on the total quality of your show.

These showcases are not mass-produced and are all custom made at the time of purchase, so each one is made with undivided attention to detail, fit, finish, and quality. All showcases are made in the USA.

This showcase shows and protects 4 of your favorite 1/24 scale cars. and is made from 3/4” Red Oak with a real Birch back panel. This case has a 1/8” thick front upward sliding Plexiglas panel to protect your highly collectible cars from dust and curious hands.

Item # E4CD

$68.23 + S&H

(Cars and Engraving are not included)

CLICK ON PHOTO TO SEE MORE LARGER VIEWS OF THIS CASE

Showcase outside dimensions

10” Tall X 22-1/2” Wide X 5-1/2” Deep

Backing for this showcase

Simulated Coffee Bean Leather Panel ($65.00 + S&H)

or

Real Birch Panel - as shown in photo ($68.23 + S&H)

This showcase shows and protects 6 of your favorite 1/24 scale cars and 1 large or 2 smaller NASCAR McFarlane action figures. This showcase can be ordered to show 9 of your 1/24 scale cars without the center used for an action figure. This case has a 1/8” thick front upward sliding Plexiglas panel to protect your highly collectible cars from dust and curious hands.

Item # E6C1AFD

$369.95 +S&H

(Cars & Action Figure not included)

CLICK ON PHOTOS TO SEE MORE LARGER VIEWS OF THIS CASE

Usable shelf dimensions:

9-1/4" wide and 4-1/4" from the back of the case to the front of the shelf and have 4-1/4" of space between shelves

1/8" Clear Plexiglas shelves with a gold tone edging

Center area dimensions

9-1/4" wide X 13" tall X 4-1/4" deep

Outside case dimensions:

30-3/4" wide X 20" tall X 5-14" deep

Backing for this display

Real Birch

This showcase shows and protects 6 of your favorite 1/24 scale cars. This case has a 1/8” thick front upward sliding Plexiglas panel to protect your highly collectible cars from dust and curious hands.

Item # E6CD

$244.95 + S&H

(Cars are not included)

  

CLICK ON PHOTOS TO SEE MORE LARGER VIEWS OF THIS CASE

Usable shelf dimensions:

19" wide and 4-1/4" from the back of the case to the front of the shelf and have 4-1/4" of space between shelves

1/4" thick Clear Plexiglas shelves without gold tone edging

Outside case dimensions:

20-1/2" wide X 20" tall X 5-1/4" deep

Backing for this display

Simulated "Coffee Bean Leather" panel

 

All "ELITE SHOWCASES" are made with:

3/4" real Oak using one, all, or a combination of the following joints for superior strength and integrity:

Tongue & Groove, Mortise & Tenon, Rabbit, and Dado

Real "Birch" or a simulated "Coffee Bean Leather" panel for the backs

Clear 1/8" thick Plexiglas front upward slider (Lexan Extra)

Mounting holes placed at 16" on center for safe and secure mounting directly to wall studs & hardware

Quality Minwax products for a superior finish

What is not used:

Chip board, MDF board, Plywood, Wood veneers, or Laminates

To order a custom "Elite Showcase" email us at:

eliteshowcases&victorylaneproducts.com

TROPHY DISPLAYS 

(Cars and Engravings not included)

This magnificent display shown is available for 1/24, 1/32 & 1/18 scale diecast and 1/32 scale Slot-Cars. The overall height from top to bottom is approximately 9-1/2" tall. This display features two center supports and includes a crystal clear cover to protect your collectables from dust, dirt, and unwanted handling. The bottom base is finished with protective felt. The fronts on these displays are large enough to accept the optional NASCAR team emblems or engraved plates. To order an item in this category email us at: 4sales@victorylaneproducts.com

$42.95 for 1/24 &1/32 scale

$59.95 for 1/18 scale

(Cars and Emblems not included)

This awesome display features our custom multi-car design for 1/18, 1/24 scale diecast and 1/32 scale Slot-Cars, includes crystal clear covers to protect your collectables from dust, dirt, and unwanted handling. The height for the 1/24 scale display from top to bottom is approximately 10-3/4" tall and 31" wide. Please note that the picture shows this display with an "Ebony" finish, this display is no longer stained this color. It is available in "Golden Oak" or "Red Mahogany". The overall height for the 1/18 scale display from top to bottom is approximately 11-1/2" tall and 42-1/2" wide. To order the custom "Pro-Series Display" and for information regarding optional emblems, card holders, and engravings e-mail us at: 4sales@victorylaneproducts.com

(Cars, Engravings, and Card & holder are not included)

$97.45 for 1/24 & 1/32 scale

Plus Shipping & Handling

Ships in the 48 Contiguous U.S. Alaska & Hawaii only

$159.95

Plus Shipping & Handling

Ships in the 48 Contiguous U.S. Alaska & Hawaii only

To order an item in this category email us at: 4sales@victorylaneproducts.com

This 1/24 scale display is 1 1/2" tall and is an open display.

Patent No.: US D534,011 S

$24.95

Plus Shipping & Handling

FREE SHIPPING in the 48 Contiguous U.S. only

To order an item in this category email us at: 4sales@victorylaneproducts.com

This 1/24 scale display is 2 1/2" tall and is an open display.

$29.95

Plus Shipping & Handling